Also, ensure the Re-Partition checkbox is chosen only if a. Step 8: In Odin, enable Auto Reboot and F. Step 7: Select the following files in Odin from extracted P5110XXDMH2 firmware folder:
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer. Additionally, the successful connected will be indicated by a message saying Added. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Step 6: Connect the Galaxy Tab 2 10.1 to the computer using USB cable while it is in the Download Mode. Step 5: Run Odin on the computer as an Administrator. Now press the Volume Up button to enter Download Mode. Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files. Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a. Steps to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with Android 4.2.2 XXDMH2 Jelly Bean Firmware Android 4.2.2 XXDMH2 Jelly Bean Firmware (Alternative Link) Verify the model number of the Galaxy Tab 2 10.1 by navigating to Settings > About Phone.ġ. Applying this to any incorrect variant might brick the device. The Android 4.2.2 XXDMH2 Jelly Bean firmware is compatible only with the Wi-Fi version of Samsung Galaxy Tab 2 10.1 with model number P5110. Ensure the battery of the device is charged more than 80 percent.Ħ. The Galaxy Tab 2 10.1 should be factory unlocked.ĥ. Make a backup of all your important data before following the guide.Ĥ. Enable USB Debugging Mode on the device by navigating to Settings > Developer Options.ģ.
Install USB Drivers for Samsung Galaxy Tab 2 10.1 on the computer.Ģ. Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside Australia can now download and install the same manually, using our step-by-step guide.ġ. The new official firmware is currently available in Australia as an Over-The-Air (OTA) update as well as through Samsung KIES. Thanks to SamMobile for the image and the firmware.Following the international 3G version of Galaxy Tab 2 10.1 (GT-P5100), Samsung has recently released the Android 4.2.2 Jelly Bean update for the Wi-Fi version of Galaxy Tab 2 10.1 with model number GT-P5110. Just turn off the tablet and boot it into recovery mode using the key combo: “Home+ Power + Volume Up” and selecting Factory Reset. You can factory reset the phone should anything go wrong. What to do in case of bootloops, or errors Click on Start and let it flash the firmware. Make sure “re-partition” option is ticked.ħ. Click on the buttons mentioned below in odin, navigate to the folder where you extracted the firmware and assign the following files. Use the USB cable to connect the tablet to your computer and wait for a blue sign in Odin.ĥ. Boot into download mode by using the key combo “Home + Power + Volume down”Ĥ. Unzip the downloaded firmware zip file and extract it to any folder.ģ. (It is also included in the firmware package)ġ.
Take a back up of everything before you proceed.
How to install the official 4.2.2 update on your Samsung Galaxy Note 8.0
DISCLAIMER: AndroidPure and the Author are not responsible for any damage you may incur.